Detail CSE P Series Junction Boxes

CSE P series junction boxes

The CSE - P enclosures are  normally   used in the  chemical  and  petrochemical  plants,  off-shore platforms,   refineries and any other industry where hazardous atmospheres   (gas  and  combustible  dust)   are   potentially present.

The CSE - P enclosures range has been designed to meet the main  requirements  of  power  distribution,  monitoring  and signalling, and other electrical functions inside the hazardous area of the plant

 

Function

The CSE - P enclosures are normally used form the following main applications:

- control stations   

- emergency call units  

- instrument housings

- circuit breakers   

- switches and changeover switches

 - lighting controls - terminal boxes   

- electrical housing   

- battery container

The CSE P A enclosures are available  in different sizes so to create a large and modular range with different  heights.

The CSE - P enclosures, jointed together through dedicated flanges,  can become a large panel, maintaining the original IP protection. Starting height 90 mm. the CSE - P series can be equipped with operators (pilot lights, push buttons, switches, ect.) on cover.

 

Construction

The materials used to manufacture the CSE - P series have been studied to grant the maximum protection against the highly corrosive agents present in these industries:

- body and cover in glass-reinforced polyester (GRP) black coloured to provide the maximum UV protection and loaded with carbon, to eliminate the risk of ignition sources through static induced sparking resistivity.

- antiloosening screws on cover in stainless steel AISI 316

- gasket on cover in silicone

- internal fixing screws in stainless steel

Accessories

To CSE - P enclosures can be completed with the following accessories:

- internal earth continuity plate in galvanized steel, copper or brass

- internal mounting plate in galvanized steel or stainless steel

 - mounting brackets in stainless steel

- internal and external earth screws in stainless steel AISI 316

- external hinges in thermoplastic material

Protection certificate number: IMQ 13 ATEX 000

marking:

` II 2GD     Ex e ia IIC T6 Gb    Ex tb IIIC T85°C   Db (terminal boxes)

` II 2GD     Ex d e mb IIC T6 Gb    Ex tb IIIC T85°C   Db (control stations)

ambient temperature: -40°C  +60°C

degree of protection: IP66

conformity: Directive ATEX 94/9/EC

standards: EN60079-0 / EN60079-1 / EN60079-7 / EN60079-11 / EN 60079-18 / EN60079-31

category: suitable for Zone 1 – 21 (gas) and Zone 2 – 22 (dust)